Spindle castle nut, 1"-14 thread, 12 castellations (Dexter newer style)
Same thread (1"-14) and same castle style. Use with the washer your spindle was built for: a plain round washer on a spindle with a cotter-pin hole, or the D washer (plus tang washer or retainer) on a Dexter E-Z Lube spindle with a flat. Set bearing preload by the axle maker's procedure, then fit a new cotter pin. The 12 slots give finer cotter-pin alignment than the 6-slot nut.
Specs
- style
- castle
- thread
- 1-14 UNS
- castellations
- 12
Interchangeable part numbers
| Maker | Part number | Basis |
|---|---|---|
| Dexter | 006-176-00 | Seller's claim |
| Dexter (Redline) | 6-176 | Seller's claim |
Where to buy
| Seller | Item | Price each | |
|---|---|---|---|
| Felling Trailers | 6-176 1"-14 spindle castle hex nut, 12 castellations | $5.95 seen 2026-11-15 | View |
| Hanna RV | 6-176 spindle castle hex nut 1"-14, 12 castellations | $9.99 seen 2026-11-15 | View |
Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.
Related parts
The 6-castellation 1"-14 nut (165686 / 006-001-00) threads onto the same spindle.
Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.