Slipper leaf spring, 3" wide, 7 leaf, 7,500 lb per spring, 30-1/2", 1" eye, flat end (15,000 lb axle)

Same slipper (hook-end) type, width, leaf count, capacity per spring and eye size. Makers measure length differently (eye to hanger contact point vs. eye to slipper end), so compare against your old spring the same way. Replace springs in pairs, same brand both sides. Heavy 3" springs for 10K HD, 12K and 15K axles share the same 30-1/2" length, 3" width and 1" rubber-bushed eye; only the leaf count and rating change, so read the leaf count and never fit a lighter spring. Flat-end (Dexter) and radius-end aftermarket springs ride in different hangers: match the end style too. Replace in pairs (all springs on a tandem).

Specs

type
slipper, flat end
leaves
7
axle lb
15000
width in
3
eye id in
1
length in
30-1/2
capacity per spring lb
7500

Interchangeable part numbers

MakerPart numberBasis
Dexter072-045-00Seller's claim
Dexter072-045-01Seller's claim
etrailer SKUDX35QRSeller's claim
Redline (DexKo)72-45-1Seller's claim

Where to buy

SellerItemPrice each
R&P Carriages7-leaf 72-45 slipper spring for 15,000 lb axles, 30", 3"$165.99
seen 2026-11-16
View
Hanna RVSlipper spring 72-45-1, 7,500 lb, 7 leaf, 30" x 3", 1" eye$209.99
seen 2026-11-16
View
Felling Trailers72-45-1 7,500 lb 7-leaf slipper spring 30"$298.95
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Related parts

Universal SP-270275 is a 7-leaf 3" spring for 15K axles with a radius end: same rating, different hanger.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.