Slipper leaf spring, 3" wide, 5 leaf, 5,000 lb per spring, 30-1/2", 1" eye, flat end (10,000 lb HD axle)

Same slipper (hook-end) type, width, leaf count, capacity per spring and eye size. Makers measure length differently (eye to hanger contact point vs. eye to slipper end), so compare against your old spring the same way. Replace springs in pairs, same brand both sides. Heavy 3" springs for 10K HD, 12K and 15K axles share the same 30-1/2" length, 3" width and 1" rubber-bushed eye; only the leaf count and rating change, so read the leaf count and never fit a lighter spring. Flat-end (Dexter) and radius-end aftermarket springs ride in different hangers: match the end style too. Replace in pairs (all springs on a tandem).

Specs

type
slipper, flat end
leaves
5
axle lb
10000
width in
3
eye id in
1
length in
30-1/2
capacity per spring lb
5000

Interchangeable part numbers

MakerPart numberBasis
Dexter072-043-00Seller's claim
Dexter072-043-01Seller's claim
Industry / otherTS894-5Seller's claim
R&P Carriages72-43Seller's claim
Redline (DexKo)72-43-1Seller's claim
Universal Group17243Seller's claim

Where to buy

SellerItemPrice each
R&P CarriagesSlipper spring 30", 5 leaf, 5,000 lb, 3" wide, 10K HD$132.45
seen 2026-11-16
View
Hanna RVSlipper spring 72-43-1, 5,000 lb, 5 leaf, 30" x 3", 1" eye$143.99
seen 2026-11-16
View
trailerparts.com5-leaf 5,000 lb slipper flat-end spring (similar to 072-043-00)$181.20
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Related parts

Radius-end 5-leaf 3" springs (Universal SP-268275, Springworks 72-43 radius end) are the same rating with a different end: they need a radius-end hanger.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.