Slipper leaf spring, 2-1/2" wide, 5 leaf, 5,000 lb per spring, 30", 3/4" bronze-bushed eye, flat (10,000 lb general duty axle)
Same slipper (hook-end) type, width, leaf count, capacity per spring and eye size. Makers measure length differently (eye to hanger contact point vs. eye to slipper end), so compare against your old spring the same way. Replace springs in pairs, same brand both sides. 10K general duty axles use 2-1/2" springs; 10K heavy duty uses 3". They never interchange.
Specs
- type
- slipper, flat end
- leaves
- 5
- axle lb
- 10000
- width in
- 2-1/2
- eye id in
- 3/4
- length in
- 30
- capacity per spring lb
- 5000
Interchangeable part numbers
| Maker | Part number | Basis |
|---|---|---|
| Dexter | 072-021-00 | Maker's own listing |
| Dexter | 9150027 | Maker's own listing |
Where to buy
No seller prices on file yet.
Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.
Related parts
Hook-end 2-1/2" 10K springs are different parts: Dexter 072-077-00 / 72-77 (7/8" bronze eye) and 72-80 (3/4" bushing). AL-KO / QRG 10K uses a 2-1/2" x 32-1/2" spring (D093161).
Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.