Slipper leaf spring, 2" wide, 4 leaf, 2,500 lb per spring, 9/16" eye (5,000 lb axle)

Same slipper (hook-end) type, width, leaf count, capacity per spring and eye size. Makers measure length differently (eye to hanger contact point vs. eye to slipper end), so compare against your old spring the same way. Replace springs in pairs, same brand both sides. DexKo rates 072-031-00 at 2,500 lb per spring (26-1/8" eye to hanger point); etrailer's DX93QR listing calls it a spring for 2,500 lb axles. Check your axle tag.

Specs

type
slipper, hook end
leaves
4
axle lb
5000
width in
2
eye id in
9/16
capacity per spring lb
2500

Interchangeable part numbers

MakerPart numberBasis
Dexter072-031-00Maker's own listing
Redline (DexKo)1003T3Maker's own listing
CURT (Lippert)125250Seller's claim
Dexter (etrailer SKU)DX93QRSeller's claim
LippertLP61LSBSeller's claim

Where to buy

SellerItemPrice each
Hanna RVSlipper spring 1003T3, 2,500 lb, 4 leaf, 26-1/8" x 2", 9/16" eye$59.99
seen 2026-11-15
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.