Dexter HDSS suspension kit, single axle (end hangers, track rods), 10-25K
Pick suspension parts by spring width and type, axle spacing (center of axle to center of axle), number of axles and axle rating, then measure the old equalizer (hole to hole) and hanger height. A kit made for another spacing moves the axles and the tires can hit. Weld-on hangers must be welded square and in line by someone qualified. HDSS pairs with 22,500 lb 3-leaf slippers such as Dexter 072-048-00.
Specs
- axles
- single
- axle lb
- 25000
- suspension
- HDSS
Interchangeable part numbers
| Maker | Part number | Basis |
|---|---|---|
| Dexter | HAP-161-01 | Maker's own listing |
Where to buy
No seller prices on file yet.
Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.
Related parts
Bump stops for HDSS: HAP-166-00 (one pair).
Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.