Tie Down Eliminator 9.6" vented hub-rotor, 5 on 4-1/2", 3,500 lb (post-2009; replaces the 10.25" rotor)

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts. Going from the old 10.25" rotor to the 9.6" one also needs the 9.6" caliper bracket (Tie Down 44676G).

Specs

seal
10-19
rotor
9.6 in integral vented
axle lb
3500
bearings
L68149 inner, L44649 outer
bolt pattern
5 on 4-1/2

Interchangeable part numbers

MakerPart numberBasis
R&P CarriagesTDE46845-KITSeller's claim
Tie Down Engineering46845Seller's claim

Where to buy

SellerItemPrice each
R&P CarriagesRotor hub 46845, caliper bracket 44676G, bearing kit, 3,500 lb$196.99
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.