Front and rear hangers, 3" slipper springs, 10-15K (Dexter 028-067-04 front, 030-066-01 rear)

Pick suspension parts by spring width and type, axle spacing (center of axle to center of axle), number of axles and axle rating, then measure the old equalizer (hole to hole) and hanger height. A kit made for another spacing moves the axles and the tires can hit. Weld-on hangers must be welded square and in line by someone qualified.

Specs

spring
3 in slipper
axle lb
15000
position
front/rear

Interchangeable part numbers

MakerPart numberBasis
Dexter028-067-04Maker's own listing
Dexter030-066-01Maker's own listing

Where to buy

No seller prices on file yet.

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Related parts

Lippert's single-axle 12K/16K slipper hanger kits (341899; Order Trailer Parts 300803 with 7-3/4" tall end hangers) are a different hanger height: don't mix ends.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.