Tie Down / Dexter G5 stainless integral hub-rotor disc kit, 11.75" rotor, 6 on 5-1/2", 6,000 lb, one wheel
Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts. Fits 14" or 15" wheels; replaces 12" drum brakes. Not the same rotor as the 12" Eliminator.
Specs
- per
- one wheel
- rotor
- 11.75 in x 0.3125 integral
- finish
- stainless
- axle lb
- 6000
- bolt pattern
- 6 on 5-1/2
Interchangeable part numbers
| Maker | Part number | Basis |
|---|---|---|
| Dexter (Tie Down) | K71-G00-43 | Seller's claim |
| Tie Down Engineering | 82092 | Seller's claim |
Where to buy
No seller prices on file yet.
Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.
Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.