Tie Down / Dexter Eliminator 12" integral vented hub-rotor disc kit, 6 on 5-1/2", 5,200-6,000 lb, aluminum caliper, one wheel

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts. Replaces 12" drum or disc brakes; fits 13" wheels and larger. Two kits per axle.

Specs

per
one wheel
rotor
12 in integral vented
axle lb
6000
caliper
aluminum
bolt pattern
6 on 5-1/2

Interchangeable part numbers

MakerPart numberBasis
Dexter (Tie Down)K71-G00-97Seller's claim
Tie Down Engineering82100Seller's claim

Where to buy

SellerItemPrice each
Trailer Parts DepotDexter disc brake kit 5.2K/6K, 12" vented integral rotor/hub (Tie Down 82100)$323.29
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.