Tie Down / Dexter 10" integral vented hub-rotor disc kit, 5 on 4-1/2", 4-bolt flange, 3,500 lb, one wheel

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts. Replaces 10" drum brakes. Two kits per axle.

Specs

per
one wheel
rotor
10 in integral vented
flange
4-bolt
axle lb
3500
bolt pattern
5 on 4-1/2

Interchangeable part numbers

MakerPart numberBasis
Tie Down Engineering / Dexter82113Seller's claim

Where to buy

SellerItemPrice each
Hanna RVDexter 82113 10" integral style vented rotor disc brake kit$344.99
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Related parts

The older Tie Down kit 82405 is discontinued; etrailer offers the Dexter Premier 10" hub/rotor kit (T2HRCM10DAC) in its place.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.