Kodiak rotor disc kit, 11" rotor, 8 on 6-1/2", Dexter/Lippert 12K, 7-bolt flange, one axle

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts. For 16" dual or 17.5" single wheels. Mounts to the 12K idler hub (Dexter 8-214-8UC1 / 8-214-10).

Specs

rotor
11 in
flange
7-bolt
axle lb
12000
bolt pattern
8 on 6-1/2

Interchangeable part numbers

MakerPart numberBasis
Kodiak by DexterK71-2R-11-12D-HD-DEERMaker's own listing
Kodiak (etrailer SKU)K2R1258L12Seller's claim

Where to buy

No seller prices on file yet.

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.