Kodiak rotor disc kit, 11" rotor, 8 on 6-1/2", 5/8" studs, Dexter/Lippert 10K general duty before 7/2009 (8-288 hub), one axle

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts. Only for 10K GD axles built before July 2009 with the 8-288 hub (leaf spring, dual wheels or 17.5" single).

Specs

stud
5/8
rotor
11 in
axle lb
10000
fits hub
Dexter 8-288 (pre-7/2009)
bolt pattern
8 on 6-1/2

Interchangeable part numbers

MakerPart numberBasis
Kodiak (etrailer SKU)K2R1058D11Seller's claim
Kodiak by DexterK71-2R-11-10-HD-DEERSeller's claim

Where to buy

SellerItemPrice each
brakes4trailersKodiak 10K GD disc brake kit (fits Dexter 10K GD with 8-288 hub)$1224.00
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.