Disc brake hub/rotor kit, 13" rotor, 8 on 6-1/2", 7,000 lb, two wheels

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits.

Specs

rotor
13 in hub-rotor
wheels
16 in and up
axle lb
7000
bolt pattern
8 on 6-1/2

Interchangeable part numbers

MakerPart numberBasis
DeeMaxx (etrailer SKU)DE53YRSeller's claim
Kodiak (etrailer SKU)K2HR712DSeller's claim

Where to buy

SellerItemPrice each
etrailerDeeMaxx disc brake kit, 13" hub/rotor, 8 on 6-1/2, 1/2" bolts, 7K$678.59
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Related parts

Kodiak by Dexter also makes a 7,200-8,000 lb 13" hub-rotor kit (8 on 6.5, 9/16" studs, grease or oil); Dexter K71-635 is an 8K slip-on rotor retrofit for the #42 spindle.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.