Disc brake hub-rotor (one-piece), Lippert 6,000 lb, 6 on 5-1/2", 1/2" studs, grease, press-in cap
Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits.
Specs
- lube
- grease
- stud
- 1/2
- axle lb
- 6000
- bolt pattern
- 6 on 5-1/2
Interchangeable part numbers
| Maker | Part number | Basis |
|---|---|---|
| Lippert | 792640 | Maker's own listing |
| Lippert | 792646 | Maker's own listing |
Where to buy
No seller prices on file yet.
Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.
Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.