Dexter disc brake slip-on rotor retrofit kit, 8,000 lb, 8 on 6-1/2", #42 spindle, one wheel

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts.

Specs

per
one wheel
rotor
slip-on
axle lb
8000
spindle
#42
bolt pattern
8 on 6-1/2

Interchangeable part numbers

MakerPart numberBasis
DexterK71-635Maker's own listing
DexterK71-635-00Maker's own listing
Industry / other6450512Maker's own listing

Where to buy

SellerItemPrice each
Hanna RVK71-635 8,000 lb disc brake slip-on kit for 1 wheel$850.99
seen 2026-11-16
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.