Dexter disc brake kit (caliper side), 7,000 lb, for 12-1/4" hub-rotor 8 on 6-1/2", left

Same rotor size and style (slip-on rotor vs one-piece hub-rotor), bolt pattern, stud size, brake flange (4- or 5-bolt) and axle rating. Coatings (Gal-Dex, Dacromet, zinc, stainless, E-coat) change corrosion life, not fit. Disc brakes need a disc-rated actuator (about 1,500-1,600 psi) and wheels that clear the caliper. Dexter says to use only Dexter or Kodiak hubs with Kodiak rotor kits. Kits that fit the same axle but come from different brands use their own brackets and calipers: replace a whole side, not mixed parts. Needs the hub-rotor (e.g. Dexter 008-416-92).

Specs

side
LH
rotor
12-1/4 in hub-rotor
axle lb
7000
bolt pattern
8 on 6-1/2

Interchangeable part numbers

MakerPart numberBasis
DexterK71-694-00Seller's claim

Where to buy

No seller prices on file yet.

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Related parts

K71-695-00 is the right-hand kit.

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.