Threaded oil/grease hub cap 4", Dexter 9K-15K (21-36)

Valcrum lists ST-400D as replacing Dexter 21-36. Same 4" thread as the Lippert cap, but shallow: Dexter hubs use a double spindle nut with a retainer ring, which the shallow cap clears. Match the thread size and the hub maker; a cap from another maker's hub of the same nominal size may not thread on. Replace the O-ring with the cap.

Specs

lube
oil bath or grease
axle lb
Dexter 9,000 made after 10/1989, 10,000, 12,000, 15,000
thread in
4

Interchangeable part numbers

MakerPart numberBasis
Dexter021-036-00Maker's own listing
ValcrumST-400DMaker's own listing
ValcrumHS-400DMaker's own listing
Dexter21-36Maker's chart

Where to buy

SellerItemPrice each
ValcrumValcrum ST-400D (upgrade Dexter 21-36)
Will-call pickup at Valcrum, 3851 Yale St, Houston, TX, for orders placed on valcrum.com before 2 pm Central (Houston area).
$44.95
seen 2026-11-15
View
ValcrumValcrum Hydro-Shield HS-400D, 9K-15K
Will-call pickup at Valcrum, 3851 Yale St, Houston, TX, for orders placed on valcrum.com before 2 pm Central (Houston area).
$52.99
seen 2026-11-15
View

Prices are what each seller's page showed on the date listed and are re-checked after 29 days. TrailerApp may earn a commission from some sellers. Confirm against the tag on your axle or hub before ordering.

Related parts

Lippert 10K-16K hubs need the deeper ST-400 / Lippert 693935 to cover their castle nut (see CAP-400-LCI).

Not sure this is your part? Ask Trailer AI with your axle rating or the number on the old part.