Paperwork
- Match the VIN. Find the VIN plate or sticker (usually on the tongue) and make sure it matches the title or registration exactly.
- Seller = name on title. If they don't match, walk away or get the paper trail.
- Title or registration? In Texas, heavier trailers are titled and lighter ones may only be registered. Ask TxDMV or your county tax office what your trailer needs, then transfer it promptly after the sale.
- Homemade? A homebuilt trailer with no factory VIN needs extra steps to title and register. Budget the time.
Tires & wheels
- Read the DOT date code. The last four digits on the sidewall are the week and year it was made ("2219" = week 22 of 2019). Trailer tires often crack and fail from age long before the tread wears down.
- Look for ST tires rated for the trailer's load, not passenger-car tires.
- Uneven wear points to a bent axle, a bad alignment or overloading.
Frame, axles & tongue
- Cracked welds at the tongue, crossmembers and spring hangers. Fresh paint over one weld can mean a repair.
- Rust-through on the tube steel, especially on boat trailers.
- Axle sag or springs flattened out — measure ride height side to side.
Brakes, bearings & lights
- Hook it up and test. All lights, and the brakes if it has them. Pull the breakaway pin — the wheels should lock.
- Spin each wheel with it jacked up. Listen for grinding and feel for play.
Price check before you haggle. Search the same size and type on TrailerApp to see what new and used trailers are going for at Texas dealers near you. A new trailer with a warranty is sometimes closer in price than you'd expect.